Changing brake fluid can be a slippery subject. Some manufacturers include it in their maintenance schedules and others don’t.

Why is it important that brake fluid is in good condition?

Even though fluid dwells in a sealed system, it still can absorb moisture over time, and that absorption can lead to corrosion in the brake system and brake lines. Moisture also lowers the boiling point of the fluid, and that can reduce a vehicle’s brake pedal effectiveness in repeated hard stops, or it could even lead to brake failure.

If the manufacturer lists a 10-year interval or none at all for replacing brake fluid, why do you need to have your brake fluid flushed, and how often should a fluid flush be done?

Every two or three years is probably too often for flushing, though if it helps you sleep at night, go for the flush. Just be aware that some service shops, especially those that make their living by replacing fluids, might try to scare you with dire warnings that a brake disaster is imminent unless you flush all your vehicle’s fluids long before it is necessary.

Unless the manufacturer calls for it sooner, we would wait four or five years for a flush and have old fluid replaced at the same time as other brake component work, such as replacing brake pads, calipers or rotors. Replacing brake fluid is cheaper than replacing brake lines or a master cylinder that has corroded, so don’t automatically dismiss the brake recommendation of a mechanic as just salesmanship.

And no matter who suggests fresh fluid, make sure the brake fluid replacement is done with the type that is called for by the vehicle manufacturer. Some vehicles require DOT 4 fluid, others a different variety, such as DOT 5 fluid, so consult your owner’s manual before you give the go ahead.